Mixergy Installation Farnham, Surrey
Mixergy Case Study
Boilers2AC Transforms a Farnham Home with Energy-efficient Solutions.
The Challenge
The family of four were facing a few challenges in their home from the 80's. One major issue was the lack of hot water and the unreliable mains pressure. This, combined with a desire to improve energy efficiency and overall water pressure, led them to seek out a suitable solution for their home. The familys experience with the outdated system had tested their patience and was drastically affecting their everyday life.
The Solution
The customer contacted Boilers2AC and was immediately impressed with their prompt response and guidance in obtaining a quotation. Boilers2AC recommended a future-proofed installation tailored to his needs which included:
- A Viessmann 100-w system boiler for efficient and reliable heating
- A Mixergy 210 litre twin coil hot water cylinder which allowed for quick reheating of the hot water thanks to its innovative technology.
- A 660 Horizontal Accumulator to handle the increased capacity of hot water storage
The Impact
The installation of these products revolutionised the families home, providing ample hot water, and greatly improved water pressure which had been affecting the home for years. Additionally, this upgrade has also led to a significant improvement in overall energy efficiency.
The customer was delighted by his experience working with Boilers2AC and shared the following review:
"We contacted Boilers2AC and were immediately impressed with their response and how to proceed in obtaining a quotation. We were looking to remove our old boiler and replace it with one that could help give us more water pressure, more hot water, and looking at improving the water flow too. As our house is an old 80's home, and the water pressure and hot water were non-existent! Darren came over and looked through our current system, and we discussed the options available to us. He was prompt, friendly, and extremely knowledgeable when asking about why we were having issues and how they could be improved."
Conclusion
Boilers2AC has not only transformed the functionality of their home, but they have also provided an energy-efficient solution to the problems faced by homeowners with aging and inefficient systems. This customer success story demonstrates how the products and services offered by Boilers2AC can deliver exceptional results and positively impact their customers' lives. Thanks to Boilers2AC, the family can now enjoy continuous hot water, better water pressure, and an energy-efficient home for years to come.
The Benefits of Installing a Mixergy Hot Water Cylinder
Are you looking for an energy-efficient and cost-effective way to heat your home’s water? This innovative technology from Mixergy is designed to help you save money on your hot water bills while reducing your carbon footprint.
The Mixergy tank is up to 20% more efficient than conventional tanks, meaning it uses less energy to provide the same amount of hot water. This top-up heating design helps save homeowners money on their hot water bills and lower their carbon footprint. You can install a Mixergy tank in any home, whether it’s powered by a gas boiler, ground or air source heat pump, solar thermal or solar PV.
Not only does the Mixergy tank offer great energy savings, but it also provides convenience and peace of mind. It’s internet-connected so you can control it remotely with an app on your smartphone or tablet. You can set schedules for when you want your hot water heated and monitor how much energy you’re using in real time. Plus, the Mixergy tank has been shown to deliver up to 30% more usable hot water compared to conventional cylinders, allowing you to opt for a smaller tank with no loss of performance.
If you’re considering installing a Mixergy tank in your home, here are some commonly asked questions:
What type of homes is the Mixergy tank suitable for?
The Mixergy tank is suitable for all types of homes – whether they are powered by ground source or air source, solar thermal or PV compatible.
How much will I save on my hot water bills?
The exact amount that you will save depends on several factors such as the size of your home and how much hot water you use each day. However, many people who have installed a Mixergy tank report significant savings on their monthly bills thanks to its energy efficiency features.
Is installation difficult?
No – installation is easy and straightforward..
So if you’re looking for an energy-efficient way to heat your home’s water without breaking the bank, then consider installing a Mixergy hot water cylinder today!
For further information visit: